Basic Coating Finishes

Basic Coatings products were tested with a Taber Abrasion machine. This test determines a coatings’ resistance to abrasion. Resistance to abrasion is defined as the ability of a coating to withstand mechanical action such as scuffing or erosion.

VOC are emitted as gases from certain solids or liquids. These gases can have adverse health effects. They also combine with other elements in the presence of sunlight to form smog, a major air pollutant. The government has begun restricting the amount of VOC’s that can be included in certain products.

• Waterbased coatings typically have half as much VOC content as the traditional Oil Modified Urethane (OMU).
• Basic Coatings waterbased finishes produce less odor than fragrant OMU’s
• Green: Several of Basic® Coatings waterbased finishes meet the strictest of government regulations and LEED requirements.

Waterbased finishes will retain a clear non-yellowing appearance. OMU finishes may turn to an unsightly yellow appearance over time.

• If you don’t want a clear look but still would like to use a waterbased coating, a stain can be used to change the appearance. Also, Emulsion from Basic Coatings has more color than typical waterbased urethanes.

OMU’s contain petroleum distillants, which are combustible or flammable. Waterbased finishes are not combustible nor flammable.

• The vapors of OMU’s are also combustible or flammable. Pilot lights and other sources of spark must be turned off during the application of OMU finishes.
• Mineral spirits or solvents are needed to clean applicators or accidental spills when using OMU’s. Rags and other materials that have residue from OMU’s on them must be stored in safety containers to prevent spontaneous combustion.